#IkoKaziKE

Back to jobs

Marine Sandblaster / Painter

Amentum

Driver & Transport Services full time Mombasa Posted 2 weeks ago

Job Responsibilities:

  • Prepare surfaces for painting and protective coatings by sanding, scuffing, scraping, wire brushing, grinding, stripping, or abrasive blasting.

  • Perform sandblasting operations to remove rust, corrosion, old coatings, marine growth, and other contaminants from metal and structural surfaces.

  • Apply primers, sealers, paints, stains, varnishes, enamels, epoxies, and specialty marine coatings using brushes, rollers, and spray equipment.

  • Prepare bare wood, metal, and other substrates for finish coats by applying appropriate primers and sealers.

  • Protect surrounding equipment and surfaces using masking materials, drop cloths, plastic sheeting, and tape.

  • Fill cracks, holes, joints, and surface imperfections using caulk, putty, plaster, or other approved fillers.

  • Remove and reinstall fixtures, hardware, switch covers, lighting components, and similar items as required to complete painting activities.

  • Smooth finished surfaces using sandpaper, steel wool, scrapers, brushes, or power sanding equipment to achieve required finish quality.

  • Waterproof structures and surfaces using approved waterproofing membranes, sealants, and caulking materials.

  • Read and interpret work orders, technical drawings, specifications, and supervisor instructions to determine project requirements.

  • Inspect completed work to ensure compliance with quality standards and coating specifications.

  • Safely erect and work from ladders, scaffolding, staging, and elevated work platforms when required.

  • Operate and maintain painting, blasting, and surface preparation equipment in accordance with manufacturer recommendations and safety procedures.

  • Maintain a clean and organized work area while complying with all environmental, health, and safety regulations.

  • Utilize appropriate personal protective equipment and follow hazardous material handling procedures.

  • Support vessel maintenance, repair, and preservation activities as assigned.

  • Perform other job-related duties as assigned that are consistent with the nature and level of the position.

Required Qualifications:

  • Minimum of two (2) years of experience in paint preparation, abrasive blasting, sanding, scuffing, painting, or a related field.

  • High school diploma or equivalent.

  • Experience operating painting and surface preparation equipment.

  • Must be in possession of a valid passport and be able to travel internationally.

  • Passport must be valid for a minimum of one (1) year or more at the time of hiring.

  • Ability to obtain country-specific visas per the U.S. Department of State Foreign Clearance Guide.

  • Ability to successfully pass contract medical requirements and maintain compliance throughout the duration of deployment.

  • Must be able to obtain and maintain facility credentials/authorization.

  • Must be able to speak, read, and comprehend English.

Preferred Qualifications:

  • Prior experience working in an austere OCONUS (Outside the Continental United States) environment with a multi-national workforce

  • A valid driver’s license to legally operate a motor vehicle. Valid country driver’s license. and passport.

  • Knowledge of marine surface preparation, corrosion control, and protective coating systems.

  • Experience preparing and painting marine vessels, industrial equipment, buildings, and structural components.

  • Knowledge of abrasive blasting techniques and coating application standards.

  • Ability to recognize occupational hazards associated with painting and blasting operations and implement appropriate safety precautions.

  • Experience working independently with sound judgement and decision making skills.

Job Responsibilities:

  • Prepare surfaces for painting and protective coatings by sanding, scuffing, scraping, wire brushing, grinding, stripping, or abrasive blasting.

  • Perform sandblasting operations to remove rust, corrosion, old coatings, marine growth, and other contaminants from metal and structural surfaces.

  • Apply primers, sealers, paints, stains, varnishes, enamels, epoxies, and specialty marine coatings using brushes, rollers, and spray equipment.

  • Prepare bare wood, metal, and other substrates for finish coats by applying appropriate primers and sealers.

  • Protect surrounding equipment and surfaces using masking materials, drop cloths, plastic sheeting, and tape.

  • Fill cracks, holes, joints, and surface imperfections using caulk, putty, plaster, or other approved fillers.

  • Remove and reinstall fixtures, hardware, switch covers, lighting components, and similar items as required to complete painting activities.

  • Smooth finished surfaces using sandpaper, steel wool, scrapers, brushes, or power sanding equipment to achieve required finish quality.

  • Waterproof structures and surfaces using approved waterproofing membranes, sealants, and caulking materials.

  • Read and interpret work orders, technical drawings, specifications, and supervisor instructions to determine project requirements.

  • Inspect completed work to ensure compliance with quality standards and coating specifications.

  • Safely erect and work from ladders, scaffolding, staging, and elevated work platforms when required.

  • Operate and maintain painting, blasting, and surface preparation equipment in accordance with manufacturer recommendations and safety procedures.

  • Maintain a clean and organized work area while complying with all environmental, health, and safety regulations.

  • Utilize appropriate personal protective equipment and follow hazardous material handling procedures.

  • Support vessel maintenance, repair, and preservation activities as assigned.

  • Perform other job-related duties as assigned that are consistent with the nature and level of the position.

Required Qualifications:

  • Minimum of two (2) years of experience in paint preparation, abrasive blasting, sanding, scuffing, painting, or a related field.

  • High school diploma or equivalent.

  • Experience operating painting and surface preparation equipment.

  • Must be in possession of a valid passport and be able to travel internationally.

  • Passport must be valid for a minimum of one (1) year or more at the time of hiring.

  • Ability to obtain country-specific visas per the U.S. Department of State Foreign Clearance Guide.

  • Ability to successfully pass contract medical requirements and maintain compliance throughout the duration of deployment.

  • Must be able to obtain and maintain facility credentials/authorization.

  • Must be able to speak, read, and comprehend English.

Preferred Qualifications:

  • Prior experience working in an austere OCONUS (Outside the Continental United States) environment with a multi-national workforce

  • A valid driver’s license to legally operate a motor vehicle. Valid country driver’s license. and passport.

  • Knowledge of marine surface preparation, corrosion control, and protective coating systems.

  • Experience preparing and painting marine vessels, industrial equipment, buildings, and structural components.

  • Knowledge of abrasive blasting techniques and coating application standards.

  • Ability to recognize occupational hazards associated with painting and blasting operations and implement appropriate safety precautions.

  • Experience working independently with sound judgement and decision making skills.